The effect of porosity on the laser induced damage threshold of TiO2 and ZrO2 single layer films

Monolayer ZrO₂ and TiO₂ films were prepared on BK7 glass by physical vapor deposition (PVD) and were subsequently annealed for 1 h at 300 °C. By using the transmission spectra of two samples and the envelope method, the refractive index dispersion and extinction coefficients have been calculated. Laser induced damage threshold (LIDT) measurement shows that despite slight differences between the extinction coefficients of the two samples, the LIDT parameter of the ZrO₂ film is greater than that of the TiO₂ film. This fact leads us to consider thermal conductivity as an important parameter for interpreting the LIDT difference. According to our theoretical analysis, as a consequence of increase in the number of thermal barriers along poorer film, its thermal conductivity, and hence LIDT, decreased, which is in agreement with our experimental results. The measured porosity of the two samples shows higher porosity for TiO₂ single layer, which is in agreement with atomic force (AFM) images. The gradual and smooth damage morphology of ZrO₂ observed in optical images implies higher thermal conductivity than TiO₂.     

Quantitative assessment of motion correction for high angular resolution diffusion imaging

Several methods have been proposed for motion correction of high angular resolution diffusion imaging (HARDI) data. There have been few comparisons of these methods, partly due to a lack of quantitative metrics of performance. We compare two motion correction strategies using two figures of merit: displacement introduced by the motion correction and the 95% confidence interval of the cone of uncertainty of voxels with prolate tensors. What follows is a general approach for assessing motion correction of HARDI data that may have broad application for quality assurance and optimization of postprocessing protocols. Our analysis demonstrates two important issues related to motion correction of HARDI data: (1) although neither method we tested was dramatically superior in performance, both were dramatically better than performing no motion correction, and (2) iteration of motion correction can improve the final results. Based on the results demonstrated here, iterative motion correction is strongly recommended for HARDI acquisitions.     

Combined prostate diffusion tensor imaging and dynamic contrast enhanced MRI at 3T — quantitative correlation with biopsy

The purpose of this work was to compare diagnostic accuracy of Diffusion Tensor Imaging (DTI), dynamic contrast-enhanced magnetic resonance imaging (DCE MRI) and their combination in diagnosing prostate cancer. Twenty-five patients with clinical suspicion of prostate cancer underwent MRI, prior to transrectal ultrasound-guided biopsies. MRI data were correlated to biopsy results. Logistic regression models were constructed for the DTI parameters, DCE MRI parameters, and their combination. The areas under the receiver operator characteristic curves (AUC) were compared between the models. The nonparametric Wilcoxon signed rank test was used for statistical analysis. The sensitivity and specificity values were respectively 81% (74–87%) and 85% (79–90%) for DTI and 63% (55–70%) and 90% (85–94%) for DCE. The combination “DTI or DCE MRI” had 100% (97–100%) sensitivity and 77% (69–83%) specificity, while “DTI and DCE MRI” had 44% (37–52%) sensitivity and 98% (94–100%) specificity. The AUC for DTI+DCE parameters was significantly higher than that for either DTI (0.96 vs. 0.92, P=.0143) or DCE MRI parameters (0.96 vs. 0.87, P=.00187) alone. In conclusion, the combination of DTI and DCE MRI has significantly better accuracy in prostate cancer diagnosis than either technique alone.     

Reduced field-of-view diffusion-weighted imaging of the brain at 7 T

Ventral and rostral regions of the brain are of emerging importance for the MRI characterization of early dementia, traumatic brain injury and epilepsy. Unfortunately, standard single-shot echo planar diffusion-weighted imaging of these regions at high fields is contaminated by severe imaging artifacts in the vicinity of air–tissue interfaces. To mitigate these artifacts and improve visualization of the temporal and frontal lobes at 7 T, we applied a reduced field-of-view strategy, enabled by outer volume suppression (OVS) with novel quadratic phase radiofrequency (RF) pulses, combined with partial Fourier and parallel imaging methods. The new acquisition greatly reduced the level of artifacts in six human subjects (including four patients with early symptoms of dementia).     

An asynchronous high‐speed synchrotron shutter

A high‐repetition‐rate mechanical shutter with asynchronous control and sub‐millisecond operation has been developed and tested for specialist X‐ray systems in the field of medical diagnostics and radiation therapy. Capacitor‐coupled linear voice coil actuators are utilized to achieve opening and closing speeds as fast as 700 µs for an aperture height of 4 mm. The design allows for asynchronous control, permitting slave operation of the shutter, a feature that is distinctly suitable for a number of applications including particle image velocimetry, where high‐frame‐rate operation must be accurately synchronized and triggered by the image acquisition sequence of the detector or timing device. The design and construction of the shutter also makes it ideal, with simple and limited modifications, for applications requiring larger apertures, in particular wide beams as found in many synchrotron beamlines.     

Extremal solutions for stochastic equations indexed by negative integers and taking values in compact groups

Stochastic equations indexed by negative integers and taking values in compact groups are studied. Extremal solutions of the equations are characterized in terms of infinite products of independent random variables. This result is applied to characterize several properties of the set of all solutions in terms of the law of the driving noise.     

Novel organometallic aromatic polyester based on ferrocene

<正>A novel polyester containing ferrocenyl was prepared by low-temperature interface polycondensation of 1,1'-ferrocenedicarboxylic acid chloride with 4-(4-hydroxyphenyl)-2,3-phthalazin-1-one(DHPZ),which is a twisted non-coplanar heterocyclic bisphenol-like monomer.The newly generated polymer was evaluated based on characterization of its solubility,viscosity measurements,elemental analysis,FTIR spectroscopy,differential scanning calorimetric and thermogravimetric studies.     

Structural investigation of high‐transmittance aluminum oxynitride films deposited by ion beam sputtering

Aluminum oxynitride films were deposited by ion beam sputtering technique at room temperature. The optical properties and morphologies of the aluminum oxynitride films were studied and reported previously. It was found that the optical properties are closely related to the O contents in the films. In this study, the structures of the films were investigated by X‐ray diffractometer and XPS. Three oxidation states of N_1s in oxynitride films, N⁺, N²⁺ and N³⁺, were clearly deduced from N_1s spectra in the amorphous films fabricated under various oxygen partial pressures (P_O2). To our knowledge, three oxidation states of N_1s have not been simultaneously observed and reported in the aluminum oxynitride films previously. Corresponding bonding variations in Al_2p and O_1s spectra indicated more oxygen in oxynitride in the film as P_O2 increases. Three aluminum oxynitride networks, AlO₂N, AlO_2.5N and AlO₃N were deduced. Optical properties of aluminum oxynitride films resemble those of AlN and Al₂O₃ films when P_O2 is low and high during the deposition. The refractive indices and extinction coefficients of the aluminum oxynitride films can be adjusted by using proper P_O2 during the film depositions. Copyright © 2010 John Wiley & Sons, Ltd.